INCH-POUND
00-C-2804
March 29, 1993
SUPERSEDING
MIL-C-28662C(YD)
21 December 1987
FEDERAL SPECIFICATION
CONVEYOR, BELT, PORTABLE, DED, GED, OR EMD
This specification is approved by the Commissioner, Federal
supply service, General Services Administration, for the use
of all Federal agencies.
SCOPE
1.
1.1 Scope. This specification covers portable, elevating-troughing,
belt-type conveyors, powered by a diesel engine, gaseline engine, or electric
motor. They are intended to be used to convey rock, sand, and gravel at a
mineral products facility or rock crusher site.
1.2 Classification. The conveyors shall be of the following classes, types,
and sizes as specified (see 6.2).
PIN code
1
Class I - Diesel engine driven
2
Class II - Gasoline engine driven
3
Class III - Electric motor driven
A
A- 100 tons per hour (tph) minimum
Type
(18-inch belt)
B
Type B - 300 tph minimum (24-inch belt)
C
Type C - 500 tph minimum (30-inch belt)
1
40
feet
long
Size
1
-
2
50
feet
long
Size
2
-
3
60
feet
long
Size
3
-
4
70
feet
long
Size
4
-
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Commanding Officer (Code 156), Naval Construction Battalion Center,
1621 Pleasant Valley Road, Port Hueneme, CA 93043-4300, by using the
Standardization Document Improvement Proposal (DD Form 1426) appearing at
the end of this document or by letter.
FSC 3910
DISTRIBUTION STATEMENT A. Approved for public release; distribution is
unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business